16 x 14 x 54 Mattress and Bedframe Equipment Cover on Roll – 1.5 Mil
The BORR161454 is a 16″ wide × 14″ gusset × 54″ long gusseted polyethylene equipment cover on a roll designed for narrow-profile mattress, bedframe, and bedrail protection in healthcare facilities, home care delivery operations, and DME environments. The 16″ nominal width combined with a 14″ gusset provides an expanded circumference of approximately 44 inches — ideally matched to standard twin and full hospital mattresses (36–38″ wide, 4–6″ thick) when inserted from the end. At 1.5 mil, the cover provides enhanced puncture resistance at metal frame and bedrail contact points compared to standard 1 mil covers, extending service life through transport and patient room turnover cycles.
What Mattress and Bedframe Sizes Does the BORR161454 Cover?
The 16 × 14 gusset profile, when expanded, provides a circumference sufficient to bag standard twin hospital mattresses (approximately 36″ wide × 4–6″ thick) in an end-entry configuration with the gusset accommodating the mattress depth. The 54″ length covers a standard twin mattress from end to end with adequate overhang for tucking or taping at the base. For bedrail and frame cover applications, the 54″ length wraps most standard hospital bedrail lengths in a lengthwise sleeve orientation.
Why Does a Narrow Gusseted Profile Outperform a Flat Cover for Twin Mattress Bagging?
A flat cover at 16″ nominal width would provide only 32″ of circumferential coverage when folded flat — insufficient to wrap around a standard twin mattress (approximately 40—44″ circumference with depth included). The 14″ gusset allows the BORR161454 to expand to 44″ circumference, providing a snug end-entry fit around the mattress body that holds in position during transport without sliding or bunching. This is a critical performance difference from flat covers in this width range.
Pediatric and Crib Mattress Protection Application in Clinical Settings
Hospital pediatric units, NICU departments, and children’s care facilities use narrow-profile mattress covers in the BORR161454 size range to protect crib and pediatric bed mattresses during storage, transport between departments, and equipment staging. Standard pediatric hospital crib mattresses (typically 26–28″ wide × 4–5″ thick) insert cleanly into the BORR161454’s gusseted profile — providing complete poly protection during high-turnover room cycling between neonatal and general pediatric patients.
Why Is 1.5 Mil Recommended at This Cover Width?
At 16″ wide, the cover film is under greater tension per linear inch when pulled over a mattress end than a wider cover of equal gauge — because the same circumferential stretch is distributed across a narrower panel. The 1.5 mil construction compensates for this increased tension per unit width, maintaining adequate tear resistance at corners and gusset fold points that would rapidly fail in a 1 mil cover of this narrow profile during rapid mattress bag-and-go workflows in high-census facilities.
What Is the Roll Pack Quantity for BORR161454?
Contact NFCbags.com for roll pack quantities, case pricing, and volume purchase programs for hospital central supply departments, pediatric care facilities, DME delivery operations, and long-term care purchasing groups with ongoing mattress and bedframe cover requirements in narrow twin and pediatric mattress profiles.
Reviews
There are no reviews yet.