Clear Poly Tubing 3 mil 30″ x 3 mil 1000’/roll

Clear poly tubing in 30″ wide x 3 mil LDPE is a heavy-duty, continuous-feed packaging solution for large cylindrical goods including industrial wire spools, cable reels, large drums, and oversized round components. Manufactured from 100% virgin Low Density Polyethylene resin meeting FDA and USDA specifications, this tubing is wound 1000 feet on a 3″ core with a 1″ core plug for standard tubing dispenser and packaging table use. The 3 mil gauge provides robust puncture resistance appropriate for industrial goods with irregular surface profiles.

Specs: 30″ Lay-Flat Width | 3 mil | LDPE (100% Virgin) | 1000’/Roll (3″ Core) | FDA & USDA Compliant

Applications

Suited for wire and cable distributors sleeving large spools and reels before palletizing, industrial manufacturers covering large round components, drums, and cylinders during inter-facility transit, and commercial operations packaging large rolled goods including carpet rolls, hose assemblies, and insulation wraps. Also used in food processing for large cylindrical product bundles where FDA-compliant film is required.

Features

• 100% virgin LDPE resin — FDA and USDA compliant for direct food contact
• 3 mil nominal gauge — heavy-duty construction with puncture resistance for rough industrial surfaces
• 30″ lay-flat width — approximately 19″ open diameter, suitable for large cylindrical goods
• 1000’/roll on a 3″ core with 1″ plug — high-capacity roll for extended production run time
• High optical clarity for visual identification of wrapped goods
• Compatible with heat sealing, tying, stapling, or tape closure

Material Notes

LDPE (Low Density Polyethylene) at 3 mil delivers the puncture resistance and flexibility required for large cylindrical items with irregular or rough surface profiles. The virgin resin formulation meets FDA and USDA food contact compliance. At 30″ wide, this tubing handles applications where standard narrower tubing cannot be scaled up without switching to a bag format.

Use Case Notes

A 30″ lay-flat width corresponds to approximately a 19″ open inner diameter, making it suitable for large wire spools (12–18″ diameter), cable reels, large drums, and similar cylindrical goods. Wire and cable distributors use this format to sleeve individual spools before warehouse storage or customer shipment, preventing contamination and moisture ingress on exposed metal surfaces. Industrial OEMs use it to cover large subassemblies and round components between production stages.

Common Questions

Q: Is this tubing FDA compliant for food contact?
A: Yes. Manufactured from 100% virgin LDPE resin meeting FDA and USDA specifications for direct food contact.

Q: What is the open diameter for 30″ lay-flat tubing?
A: A 30″ lay-flat width corresponds to approximately 19.1″ open inner diameter, calculated as (lay-flat width x 2) ÷ π. For goods larger than 18″ in diameter, a wider tubing size or alternative bag format may be required.

Q: What equipment is needed for 30″ tubing?
A: The 3″ core is compatible with standard tubing dispensers and cut-to-length packaging benches. At 30″ wide, verify that your dispenser arm and heat sealer bar accommodate this width before ordering.

Why Buy

At 1000 feet per roll, this 30″ x 3 mil LDPE clear poly tubing provides a high-capacity stocking unit for industrial operations with ongoing large cylindrical goods packaging requirements. The 3 mil heavy-duty gauge and 30″ width combination addresses applications that fall outside the scope of narrower standard tubing sizes, making it a practical specification for wire distributors, cable reel packagers, and industrial manufacturers handling large-diameter round goods at scale.