Clear Poly Tubing 4 mil 10″ 4 mil 1500’/roll

PVC Pipe Section & Conduit Poly Tubing 10in — 4 mil LDPE | 1500ft

This 10-inch wide, 4 mil clear poly tubing is manufactured from 100% virgin LDPE resin and wound on a 3-inch core for roll-dispensing compatibility. The heavy 4 mil gauge and wide format make it ideal for sleeving PVC pipe sections, metal conduit, round bar stock, and other cylindrical industrial products where a custom-cut bag is preferable to a pre-formed bag. Operators cut to length and seal both ends for a fully enclosed, moisture-resistant cover.

Specs: 10″ Width | 4 mil | 100% Virgin LDPE | 1500 ft/Roll | 3″ Core | FDA/USDA Compliant

Applications

• PVC pipe and fitting section protection for plumbing wholesale distribution
• Electrical conduit sleeving for contractor supply and hardware distribution
• Steel and aluminum round bar stock bagging for metal service center shipment
• Cardboard tube and core protection in paper and packaging manufacturing
• Custom-length sleeving for rolled goods — carpet samples, fabric rolls, and foam billets

Features

• 4 mil heavy-gauge LDPE — puncture and abrasion resistant for rough pipe surfaces and threaded ends
• 10-inch lay-flat width forms a tube approximately 6.4 inches in diameter when opened
• Custom cut-to-length — no fixed bag size limitation, no wasted material
• 3-inch core with 1-inch core plug — compatible with standard roll dispensing equipment
• Heat sealable, can also be tied, taped, or stapled
• FDA/USDA compliant resin for food-adjacent applications

Material Notes

Made from 100% virgin Low Density Polyethylene (LDPE) resin with uniform 4 mil nominal wall thickness throughout the roll. At this gauge, the tubing provides substantial protection against moisture, dust, and minor physical contact damage — appropriate for industrial parts and building materials stored in outdoor yards or transit. The even wall construction ensures consistent seal quality across the full roll length.

Use Case Notes

For pipe and conduit distributors, the 10-inch width covers standard 4-inch and smaller diameter pipe sections without excess material. Cut lengths are typically matched to the pipe section being covered, with 2–3 inches of overlap on each end for sealing. The 1500-foot roll length supports high-volume lines processing hundreds of pipe sections per shift. The same roll is also useful for round bar bundling — group 2–5 bars together, slide into tubing, and seal both ends for a clean, professional presentation.

Common Questions

Q: What diameter pipe does this tubing accommodate?
A: A 10-inch lay-flat width opens to approximately a 6.4-inch diameter cylinder. This accommodates pipes up to about 5 or 6 inches in nominal diameter depending on wall thickness. For larger pipe, wider tubing rolls are required.

Q: What is the difference between 4 mil and 1.5 mil tubing?
A: 4 mil is substantially heavier and provides significantly more puncture resistance — appropriate for rough surfaces, threaded pipe ends, metal edges, and heavy use. 1.5 mil is a lighter film suited for smooth, lightweight items like floral stems, pencils, and similar products where minimal protection is needed.

Q: Can this be used with automated packaging equipment?
A: Yes, provided the equipment is compatible with 3-inch core rolls and 4 mil LDPE film. Verify film tension settings and sealing parameters on your equipment before full production runs.

Why Buy

This 10-inch 4 mil LDPE poly tubing roll provides heavy-duty, custom-cut protection for cylindrical industrial products without the inventory burden of stocking multiple pre-made bag sizes. The 1500-foot roll length supports extended production runs in pipe, conduit, and metal distribution operations. FDA/USDA compliant resin adds versatility for facilities handling food-adjacent cylindrical packaging alongside industrial applications.