Flat Poly Bags 12″ x 36 1.5 mil 1000/CTN

Curtain Rod & Rolled Textile Poly Bags 12″×36″ — 1.5 mil LDPE | Long Narrow Packaging

Light-gauge LDPE flat poly bags in a long, narrow 12×36 in. format for protective bagging of elongated products that do not fit standard square or near-square dimensions. Produced from 100% virgin Low Density Polyethylene resin meeting FDA/USDA specifications. Suitable for applications requiring a clean, professional presentation of long goods in wholesale, retail, or distribution environments.

Specs: 12×36 in. | 1.5 mil | LDPE 100% Virgin Resin | 1000/CTN | FDA/USDA Compliant

Applications

The 12×36 in. format is well suited for bagging curtain rods, closet rods, and tension rods for retail display or wholesale shipment. Additional fit uses include rolled textile samples and fabric swatches, architectural trim and molding samples, artist and architectural drawing tubes, bundled wooden dowels or craft sticks, and rolled window treatment hardware. The extended length accommodates a wide range of linear products that require clean, individual protection without excess material.

Features

Bottom seal construction provides a clean, closed base with consistent internal dimensions. The open top allows fast insertion of long or rolled items and accommodates heat sealing, tape closure, stapling, or twist-and-tie finishing. 1.5 mil LDPE provides a light but functional moisture and dust barrier appropriate for clean interior goods and presentation packaging. Superior clarity displays enclosed products for quality verification at receiving and point-of-sale.

Material Notes

Manufactured from 100% virgin LDPE resin, these bags comply with FDA and USDA requirements for incidental food contact applications. All gauge specifications are nominal. LDPE at 1.5 mil provides adequate protection for clean, non-abrasive long goods. For heavier or sharper items such as metal rods or hardware bundles, a 2 mil or heavier option is recommended.

Use Case Notes

Window treatment and décor suppliers commonly use 12×36 bags for individually packaging curtain and tension rods in retail-ready presentation. Craft and hobby distributors use this format for dowel rod assortments and balsa strips. Architectural millwork distributors use the long format for sample trim and molding pieces. The 1000-count case is appropriate for operations with consistent long-goods packaging volumes at fulfillment or production scale.

Common Questions

What is the maximum product length this bag accommodates? The usable interior length is approximately 35 in. after accounting for the bottom seal. Products up to 34 in. in length will fit with clearance for closure at the open end.

Can this bag be heat sealed? Yes. 1.5 mil LDPE seals cleanly on standard impulse or continuous band heat sealers. The open end can also be closed with tape, staples, or twist ties depending on the application.

Is 1.5 mil sufficient for metal rods or hardware? For smooth, clean metal rods with no sharp edges, 1.5 mil provides adequate protection. For threaded rod, raw-cut metal, or hardware with sharp corners, 2 mil or heavier is recommended to prevent puncture during handling.

Why Buy

100% virgin LDPE construction with FDA/USDA compliance supports both food-adjacent and general merchandise applications in a single SKU. The long, narrow 12×36 format eliminates the need for oversized bags when packaging linear or rolled goods, reducing material cost and bag bulk in long-goods operations. Available in 1000-count cases for consistent supply at high-volume distribution throughput.