Flat Poly Bags 14″ x 20″ 1 mil 1000/CTN

Sweater & Folded Jacket Poly Bags — 14×20 in., 1 mil

These 14×20 flat poly bags offer a lightweight, low-cost protective sleeve for large folded garments including sweaters, jackets, and bulky tops. At 1 mil, they serve as an economical dust cover and moisture barrier for soft goods in warehouse storage, fulfillment staging, and retail presentation where a heavier gauge is not required.

Specs: 14" x 20" | 1 mil | LDPE | 1000/Carton | FDA/USDA Compliant

Applications

• Folded sweaters, hoodies, and heavyweight knits
• Jackets and outerwear in fulfillment and warehouse storage
• Large soft-goods dust covers for boutique and retail distribution
• Oversized t-shirts and plus-size apparel bagging
• Lightweight document and flat-goods mailer sleeves

Features

• 1 mil ultra-light gauge — economical dust and moisture cover for soft goods
• Bottom-sealed construction for consistent loading
• Open end for rapid hand-loading on pack lines
• Heat sealable, tie-able, stapleable, or tape-closable
• 1000 bags per carton for high-volume apparel operations

Material Notes

Made from 100% virgin LDPE resin. At 1 mil, this is the lightest gauge commonly used for garment protection and dust covering. It is not intended for items with sharp edges, heavy weight, or significant abrasion exposure. LDPE film is FDA/USDA compliant for incidental contact applications.

Use Case Notes

The 14×20 dimension accommodates most adult-size sweaters and medium-weight jackets folded to a standard retail display fold. For 2XL and 3XL garments or thick winter coats, the 20-inch depth provides adequate room without excessive overhang. This bag is widely used in subscription box fulfillment and seasonal promotional packaging where appearance and low per-unit cost are both priorities.

Common Questions

Q: Is 1 mil strong enough for garment packaging?
A: For soft goods like sweaters, knit tops, and fleece jackets, 1 mil LDPE provides adequate dust and moisture protection in a warehouse environment. For garments with hardware (zippers, rivets, belt buckles) or high-friction surfaces, consider 2 mil for greater puncture resistance.

Q: Can these bags be used for food products?
A: Yes. The LDPE resin is FDA/USDA compliant and the bags can be used for dry, non-liquid food products. However, at 1 mil the film is best suited for lightweight dry goods rather than heavy or wet food items.

Why Buy

For apparel operations that need a clean, dust-free presentation bag at the lowest per-unit cost, the 14×20 1 mil bag is the go-to format. It loads quickly, stores flat, and keeps garments protected from handling and environmental dust without adding weight or cost to each unit shipped.