22″ × 24″ flat poly bags in 4 mil LDPE for packaging auto body panels, sheet metal stampings, large gaskets, bracket assemblies, and other medium-to-large industrial components that need robust puncture and tear protection. The 4 mil gauge handles sharp stamped metal edges and formed corners without failing, keeping components clean and free of surface scratches or corrosion from moisture during shipping and storage.
The near-square format accommodates flat or slightly contoured panels that don’t fit well in narrow bags. Also suited for large rubber moldings, electronic back plates, server components, and HVAC sheet metal parts. Made from 100% virgin LDPE resin, FDA/USDA compliant. Can be heat sealed, taped, or tied. 250 bags per carton.
- Dimensions: 22 in. W × 24 in. L
- Gauge: 4 mil
- Material: LDPE (Low Density Polyethylene), 100% virgin resin
- Seal: Bottom sealed, open top
- Closure: Heat seal, tape, or tie
- Quantity: 250 per carton
- Compliance: FDA/USDA compliant
Frequently Asked Questions
- Why use 4 mil instead of 2 mil for sheet metal parts?
- Sheet metal stampings, die castings, and formed brackets often have sharp edges and burrs that puncture 2 mil film under minimal pressure. The 4 mil gauge resists these punctures during loading and transit, preventing both bag failure and potential surface scratching of the part from loose plastic film inside the carton.
- Will a 22×24 bag fit standard automotive door panels?
- Many compact and midsize door inner panels and trim components fit within the 22×24 envelope when lying flat. For larger full-door panels or hoods, our wider and longer flat bag sizes provide a better fit. When in doubt, measure the largest flat dimension of your part and add 2–3 inches for overhang and closure.
- Can these bags be used for food packaging applications?
- Yes — the 100% virgin LDPE construction meets FDA and USDA specifications, making these technically suitable for food packaging use despite their industrial sizing and gauge.
Reviews
There are no reviews yet.