Flat Poly Bags 30″ x 36″ 3 mil 200/CTN

Heavy-duty 30″ x 36″ flat poly bags for packaging large automotive components, oversized equipment parts, and bulky flat goods that require a durable poly barrier. Made from 100% virgin LDPE at 3 mil nominal gauge, these large-format bags provide reliable moisture and surface protection for door panels, trim pieces, seat covers, and similar large-profile distribution items.

Specs: 30″ x 36″ | 3 mil | LDPE | 200/CTN | FDA Compliant

Applications

Used by automotive parts distributors for wrapping door panels, fender liners, interior trim assemblies, and seat back covers. Also used for large electronics packaging (large-format monitors, all-in-one PC panels), event signage and vinyl banner protection, large canvas and artwork storage, motorcycle and bicycle component packaging, and industrial equipment accessory bagging during transit and storage.

Features

• Large 30″ x 36″ format — accommodates door panels, large trim pieces, and oversized flat goods
• 3 mil gauge — heavy-duty for contents with edges, clips, or moderate abrasion risk
• Open-top design — wide mouth for loading large, flat items without distorting the bag
• Heat-sealable — compatible with bar and impulse sealers for secure closure
• Bottom seal construction — robust base appropriate for the scale of these bags
• 100% virgin LDPE resin — consistent gauge and seal performance
• 200 bags per carton — practical case quantity for large-bag distribution operations

Material Notes

Manufactured from 100% virgin Low Density Polyethylene (LDPE) resin meeting FDA and USDA specifications. 3 mil nominal gauge is heavy-duty, providing resistance to puncture and tearing from component edges, fastener clips, and typical automotive trim hardware. All gauges are nominal.

Use Case Notes

At 30″ x 36″, this bag fits standard door panel dimensions for most passenger vehicles with margin for folding and sealing. It also accommodates folded seat covers, large flat electronics packaging inserts, and oversized printed goods up to 28″ x 34″. The 200/CTN quantity is appropriate for distribution operations where large-bag volume per order is moderate.

Common Questions

Q: Is 3 mil adequate for automotive component edges?
A: Yes for most interior plastic trim components, door panels, and fabric seat covers. For parts with sharp metal edges or protruding hardware, additional protective wrap or foam interleave may be needed alongside the poly bag.

Q: Can these bags be heat sealed after loading?
A: Yes. Standard bar and impulse sealers accommodate the 30″ width. Confirm your sealer bar length matches or exceeds the bag width before use. The bags may also be tied, taped, or banded.

Q: Are these FDA compliant?
A: Yes. Virgin LDPE meets FDA and USDA specifications, covering food-adjacent and non-food applications in the same SKU.

Why Source These Bags

200-count carton is sized for distribution-scale large-bag operations without the cost and storage burden of pallet-level bulk quantities. Heavy 3 mil gauge handles the range of edge and clip conditions typical in automotive trim packaging. Virgin LDPE construction delivers consistent performance batch to batch for high-value parts protection applications.