Cabinet Door & Countertop Panel Poly Bags — 24" x 36" 4 mil LDPE
4 mil LDPE lay flat bags on a roll sized 24" x 36" for heavy-duty surface protection of cabinet doors, countertop panels, flat construction materials, and large format products during fabrication, transit, and installation staging. Each bag is perforated for clean roll dispensing, with a double bottom seal and wound on a 3" core with 1" diameter core plug for use with standard roll dispensers. FDA/USDA compliant virgin LDPE resin.
Specs: 24" x 36" | 4 mil | LDPE | 250/Roll | 3" Core | Double Bottom Seal | FDA/USDA Compliant
Applications
- Cabinet door and drawer front packaging at fabrication and install
- Countertop panel and stone slab individual wrapping
- Flat door and panel protection during transit and staging
- Large format composite and laminate panel bags
- Heavy flat product surface protection in warehouse and distribution
Features
- 4 mil heavy gauge — resists puncture and surface scuffing during handling and transit
- Perforated between bags for controlled roll dispensing
- Double bottom seal construction for maximum base integrity
- Wound on 3" core with 1" core plug for roll dispenser compatibility
- FDA/USDA compliant 100% virgin LDPE resin
Material Notes
Made from 100% virgin Low Density Polyethylene (LDPE) resin meeting FDA/USDA specifications. 4 mil gauge provides the surface abrasion resistance and tear strength required for large flat panels that may be stacked, slid, or handled by multiple workers during installation or distribution. The double bottom seal adds strength at the closed end, reducing failure risk under the weight of dense panel materials.
Use Case Notes
24" x 36" accommodates standard cabinet doors (typically 18"–24" wide and up to 36" tall) and smaller countertop panel sections. For panel fabrication shops and cabinetry distributors, roll dispensing reduces bag handling time per unit compared to loose-pack formats. At 250 per roll on a 3" core, this format integrates with wall-mounted or floor-standing roll dispensers commonly used in cabinet and millwork finishing operations.
Common Questions
Q: Will 4 mil hold the weight of a heavy solid wood cabinet door?
A: Yes. 4 mil LDPE is adequate for individual cabinet doors when bags are loaded from the open end and not dragged across rough surfaces. For extremely heavy or sharp-edged doors, use 6 mil construction for additional puncture resistance.
Q: Are these bags stackable without damaging the contents?
A: The 4 mil film provides a protective buffer between stacked panels, reducing direct surface contact. For high-value finishes or painted surfaces, consider foam interleaving in addition to the poly bag.
Q: Can these bags be heat sealed?
A: Yes. Standard impulse and bar sealers work with 4 mil LDPE. The open end can be heat sealed after loading for complete enclosure.
Why Buy
250 per roll, 4 mil heavy-duty construction, double bottom seal, and roll-dispensed perforated format make these a practical production packaging choice for cabinet fabricators, countertop distributors, and panel manufacturers requiring fast, consistent flat product protection during transit and installation staging.
