This 60" flat-lay LDPE poly tubing is manufactured at 4 mil thickness from 100% virgin Low Density Polyethylene resin. The wide-format roll allows users to cut custom-length covers on demand, making it well-suited for pallet overwrapping, large machinery covers, and protective sleeving of oversized industrial items.

Specs: 60" Flat-Lay (approx. 120" circumference) | 4 mil | LDPE | FDA Compliant | 3-in. Core | 350 FT/Roll

Applications

• Pallet overwrap and load protection during storage or transit


• Industrial machinery and equipment covers


• Large furniture and upholstered goods protective sleeving


• Boat, ATV, and equipment seasonal storage covers


• Construction and renovation dust and moisture barrier


• Custom-cut bundling sleeves for oversized components

Features

• 60" flat-lay width — opens to approximately 120" circumference (approx. 38" diameter)


• 4 mil thickness — heavy-duty puncture and tear resistance


• FDA/USDA compliant LDPE resin


• Neatly wound on a 3" core with 1" diameter core plug


• Cut to any length; heat seal, tie, staple, or tape to close ends


• 350 FT per roll for extended production or large-coverage runs

Material Notes

Low Density Polyethylene (LDPE) tubing at 4 mil provides a balance of flexibility and puncture resistance suitable for covering or protecting large, irregularly shaped items. Even wall thickness across the full 60" width ensures consistent barrier performance. FDA/USDA compliant for direct food contact if needed, though primary use cases are industrial and protective.

Use Case Notes

When laid flat at 60" and opened, this tubing forms a tube approximately 38" in diameter — sufficient to slip over standard 40" x 48" pallets, large equipment bases, or wide machinery footprints. Cutting a length of tubing and heat-sealing one end creates a custom slip-cover without the lead time of fabricated bags. For pallet applications, the standard approach is to cut a length equal to twice the pallet height plus 24" for overlap, then seal and tuck at the base.

Common Questions

Q: What diameter item can this tubing accommodate?

A: At 60" flat-lay, the tubing circumference is approximately 120", corresponding to a maximum interior diameter of roughly 38". Items narrower than 38" in cross-section will slide in with ease; bulkier items may require slitting one side to create a flat sheet instead.

Q: Can I use this as flat sheeting instead of a tube?

A: Yes. Slitting one edge of the tubing with a knife or scissors converts it into a flat sheet approximately 120" (10 ft.) wide, usable for drop cloths, surface protection, or custom wrapping applications.

Why Buy From Us

Wide-format poly tubing in industrial-duty 4 mil gauge, stocked for immediate fulfillment at wholesale pricing. Virgin LDPE, consistent wall thickness, 3-in. core for standard dispensing equipment.