Heavy-duty 4 mil LDPE flat poly bags in a 28×32 in. format protect automotive floor mats, cargo liners, and large textile goods from moisture, abrasion, and contamination during warehousing and distribution. The 4 mil gauge handles the stiff edges and corners of molded mats without tearing under normal warehouse handling.

Specs: 28×32 in. | 4 mil | LDPE | 200/carton | FDA compliant

Applications

• Automotive floor mat and cargo liner packaging for aftermarket parts distributors and OEM suppliers


• Commercial rubber mat and anti-fatigue mat packaging for industrial supply distributors


• Acoustic ceiling tile and suspended ceiling panel packaging for building products distributors


• Large cushion cover and pillow sham packaging for home textiles wholesale


• Framed artwork and large picture frame protection for art wholesale and gallery distribution

Features

• 100% virgin LDPE resin — no regrind, consistent 4 mil nominal gauge for reliable sealing


• 4 mil heavy-duty wall resists puncture from mat backing textures and stiff molded edges


• Bottom-seal or side-weld construction delivers full seam strength at corners


• Open-end format — heat seal, tie, staple, or tape closed on the production line


• 200 bags per carton for high-volume aftermarket parts packing operations

Material Notes

LDPE (Low Density Polyethylene) at 4 mil provides heavy-duty protection for products with abrasive or irregular surfaces such as rubber-backed mats and molded cargo liners. The material stretches to conform around irregular profiles without tearing, making it more forgiving than HDPE film at this gauge. FDA compliant virgin resin meets FDA and USDA specifications for indirect food contact applications.

Use Case Notes

The 28×32 in. format accommodates most standard automotive floor mats (typically 26×27 in. or smaller) individually or in pairs. For cargo mats with raised edges or molded trim pieces, load with the profile face down to reduce stress on the bag sidewall during sealing. Mats with rubber nibs on the backing should be loaded carefully to avoid puncturing the film before sealing.

Common Questions

Q: Can rubber-backed mats be bagged without puncturing the film?
A: Yes. The 4 mil gauge resists normal rubber nib textures found on standard floor mats. For mats with sharp molded clips or fastener studs, consider folding the mat or using a heavier gauge to reduce puncture risk.

Q: Are these FDA compliant?
A: Yes. Produced from 100% virgin LDPE resin meeting FDA and USDA specifications for indirect food contact use.

Q: What is the case quantity?
A: 200 bags per carton.

Q: What sealing methods work with 4 mil LDPE?
A: Impulse sealers and continuous band sealers are both compatible. 4 mil requires slightly higher temperature or dwell time settings than lighter gauges for a complete seal bond.

Why Buy

Automotive mat packaging is a high-volume, repetitive operation where bag-on-bag abrasion and rough mat surfaces cause frequent failures with lighter-gauge film. Our 4 mil bags are produced from 100% virgin LDPE — not regrind — delivering consistent gauge performance and reduced line stoppages compared to off-specification alternatives.