Industrial Motor & Compressor Cover Poly Bags 36x60 -- 6 mil LDPE | 50

These 36" x 60" flat poly bags are manufactured from 6 mil 100% virgin LDPE resin — the extra-heavy industrial gauge in an oversized format. At 3 feet by 5 feet, these bags are sized for large electric motors, pump housings, compressor assemblies, and heavy industrial components that require robust vapor and moisture protection during storage, transit, or factory staging.

Specs: 36" x 60" | 6 mil | 100% Virgin LDPE | 50/Box | FDA/USDA Compliant

Applications

• Large electric motor and pump packaging for OEM shipment and field storage


• Compressor and blower housing protection during installation staging


• Heavy gearbox and reducer enclosure prior to rigging and placement


• Industrial equipment wrapping for rust and contamination prevention in outdoor storage


• Large fabricated weldment and frame component protection during finishing operations

Features

• 6 mil extra-heavy LDPE — superior tear and puncture resistance for heavy, rough-surfaced equipment


• Oversized 36x60 format — accommodates large motors, frames, and assemblies up to approximately 30x54 in.


• Open-end construction — compatible with heat sealing, banding, or tape closure


• Flexible at low temperatures — suitable for outdoor equipment storage in cold climates


• 100% virgin LDPE resin — consistent gauge and strength across the case lot

Material Notes

LDPE at 6 mil nominal provides the highest puncture and tear resistance available in standard flat poly bag construction. This gauge is appropriate for components with rough weld beads, cast surfaces, forged flanges, or protruding fasteners that would quickly abrade lighter bags. The 50-count case reflects the weight and bulk of heavy-gauge oversized bags — these are not high-cycle daily packaging items but rather protective covers for high-value capital equipment.

Use Case Notes

Common users include industrial equipment manufacturers, pump and compressor OEMs, power generation service firms, and contract manufacturers who need to protect large finished sub-assemblies from contamination, condensation, and physical damage during inter-facility transit or field storage. The 36x60 format also works for large format printing plates, steel bar bundles, and rolled textile goods requiring moisture protection.

Common Questions

Q: Can these bags hold a 200 lb motor?
A: These bags are designed for enclosure and moisture protection, not load-bearing. They should be placed over or around the component as a cover, not used as a lifting sling or structural containment. For heavy motors, place the bag over the unit before crating or strapping to a pallet.

Q: Can these be heat sealed?
A: Yes. The open-end LDPE construction is compatible with wide-jaw impulse heat sealers. At 6 mil, higher sealing temperature and dwell time settings are required versus standard 2–3 mil bags — verify settings on your sealing equipment before production.

Q: Are these the same material as shrink wrap or stretch film?
A: No. These are flat poly bags made from non-oriented LDPE film. They do not shrink or cling. For bundled pallet loads, heat shrink film or stretch wrap is a different product category.

Why Buy

These 36x60 6 mil LDPE bags deliver oversized, extra-heavy protection for large industrial components that standard-gauge bags cannot handle without tearing. The 50-count box is appropriate for facilities that regularly ship or stage large motors, compressor units, and fabricated equipment. Virgin LDPE resin ensures consistent quality and performance across the entire case run.