Anchor Bolt & Heavy Fastener Poly Bags 6x9 -- 6 mil LDPE | 1000

These 6" x 9" flat poly bags are produced from 6 mil 100% virgin LDPE resin — an extra-heavy gauge that resists puncture and abrasion from sharp-threaded fasteners, rough-cut hardware, and dense metal components. The 6x9 format accommodates individual packaging of anchor bolts, foundation bolts, heavy hex bolts, and similar fasteners that would quickly abrade standard-weight bags in distribution and kitting operations.

Specs: 6" x 9" | 6 mil | 100% Virgin LDPE | 1000/Box | FDA/USDA Compliant

Applications

• Anchor bolt and foundation hardware kitting for construction supply distributors


• Heavy hex bolt and nut set packaging for industrial fastener distribution


• Structural hardware bagging — u-bolts, eye bolts, and threaded rod sections


• Dense MRO fastener packaging for maintenance and industrial supply operations


• Masonry and concrete anchor packaging for contractor supply houses

Features

• 6 mil extra-heavy gauge — resists puncture from sharp threads, hex corners, and rough cut ends


• Bottom seal construction for maximum integrity under the weight of dense metal fasteners


• 6x9 format fits most anchor bolt sizes up to approximately 8 inches in length


• Open-end design — heat sealable, can also be sealed with twist ties, tape, or staples


• 100% virgin LDPE resin — consistent gauge and clarity throughout the case


• FDA/USDA compliant resin

Material Notes

At 6 mil nominal, these bags are in the extra-heavy category — substantially thicker than 2 or 4 mil bags. The increased wall thickness provides both better puncture resistance and greater load-bearing integrity at the seal for heavy fastener contents. LDPE maintains flexibility at low temperatures, reducing brittleness during outdoor storage and cold-weather distribution operations.

Use Case Notes

For fastener distributors and construction supply houses, the 6x9 format is well-suited for hardware sold by the piece or in small quantities per bag — anchor bolts, carriage bolts, lag screws, and similar items. At 6 mil, bags hold up under aggressive handling: being tossed into bins, stacked under weight, and sliding against rough concrete or metal surfaces. The 1000-count box supports high-volume kitting and bagging operations without frequent restocking.

Common Questions

Q: Why choose 6 mil over 4 mil for fasteners?
A: While 4 mil handles many sharp hardware applications, 6 mil provides a meaningful additional margin of protection for threaded fasteners with multiple stress points (bolt tips, hex corners, cut washers). In high-throughput kitting environments where bags are handled aggressively, 6 mil substantially reduces bag failure rates compared to 4 mil.

Q: What size anchor bolts fit in a 6x9 bag?
A: The 6x9 bag accommodates fasteners up to approximately 8 inches in length and 1.5 inches in diameter. For longer or larger diameter anchor bolts, consider 8x12 or larger bag sizes.

Q: Are these bags FDA/USDA compliant?
A: Yes. The resin meets FDA/USDA specifications, making these bags suitable for food-adjacent and food-contact applications in addition to industrial fastener packaging.

Why Buy

These 6x9 6 mil LDPE bags are the appropriate choice when standard 2 or 4 mil bags fail against sharp-threaded fasteners and dense hardware contents. The 1000-count case and FDA/USDA compliant resin support both industrial fastener distribution and food-adjacent packaging in a single versatile inventory SKU. Virgin resin ensures consistent performance across the case lot.