LK® 7F0210: 2″ × 10″ TUF-R® Standard LLDPE Flat Bags for Extra-Long Narrow Items
The LK® 7F0210 is a 2-inch by 10-inch clear LLDPE flat bag from the TUF-R® Standard line. At 10 inches long in a 2-inch wide format, this bag handles items that are notably elongated but narrow: full-length pencils and pens that exceed the 7F0208’s range, slim markers, incense sticks, narrow craft dowels, long zip ties, slim electronics cables, and elongated food items like breadsticks and biscotti. The 2-inch width keeps the bag profile snug around narrow products, and the 10-inch length accommodates items up to approximately 8.5 inches with adequate sealing clearance. NFC Bags stocks 7F0210 in case quantities.
Bag Specifications: 2″ × 10″, 0.9 Mil, Clear LLDPE, Open Top
Width: 2″. Length: 10″. Gauge: 0.9 mil. Film type: LLDPE. Color: clear. Opening: open top. Closure method: heat seal, fold-and-staple, twist tie, or adhesive label. FDA compliant for direct food contact. Recyclable. Sold per case.
10-Inch Length: Coverage for Items in the 7-to-8.5-Inch Range
The 7F0210 exists for items that exceed the 8-inch bag’s practical range. A standard full-length wooden pencil at 7.5 inches fits in a 7F0208, but with only 0.5 inches of film above the eraser — barely enough for a clean seal and no room to trim. In the 7F0210, the same pencil has 2.5 inches of film above the eraser, providing a clean sealing zone and room to print or label above the seal. Items in the 7–8.5-inch range — including long-handled cosmetic brushes, standard 7-inch craft sticks, slim LED light strips, and premium biscotti — are best matched to the 10-inch bag format. The 7F0212 (2×12″) extends coverage to items up to about 10.5 inches for the longest narrow items in the series.
When Extra Bag Length Enables Cleaner Seals and Better Item Positioning in Narrow Flat Bags
In narrow flat bags, the length-to-item relationship matters because the bag has no width slack to absorb positioning errors. A 2-inch-wide bag around a 1.5-inch-wide item has only 0.25 inches of lateral slack on each side. If the item is also nearly the full bag length, there is no room to reposition the product to center the seal. In a properly sized bag, the item sits in the lower two-thirds of the bag with the top third reserved for sealing. The 7F0210’s 10 inches allows items up to 8.5 inches to sit naturally in this proportion without operator adjustment. This reduces sealing errors, bag waste, and the appearance inconsistency that arises when products are sealed at the very edge of the bag. For production environments sealing at volume on an impulse or band sealer, properly sized bags — where the seal zone is consistently positioned — reduce setup time and seal failures across a run.
7F0210 vs. 7F0208 and 7F0212: Choosing the Right Length in the 2-Inch Series
7F0208 (2×8″) accommodates items up to about 7 inches; 7F0210 (2×10″) accommodates items up to about 8.5 inches; 7F0212 (2×12″) accommodates items up to about 10.5 inches. Measure the longest item in the application, add 1.5 to 2 inches for sealing margin, and select the bag whose length meets or just exceeds that total. Items at exactly 7 inches fall comfortably in the 7F0210; items at exactly 8.5 inches should move to the 7F0212 to maintain adequate seal margin. All three lengths are stocked at NFC Bags.
How to Order 7F0210 from NFC Bags
The LK® 7F0210 is available for direct purchase at NFC Bags in case quantities. No account setup, quote, or minimum order applies. Standard orders ship same business day. Volume pricing is available. Browse the full TUF-R® 7F flat bag series at NFC Bags for all available sizes.
Reviews
There are no reviews yet.