LK® 9F2436 – 24×36 TUF-R® Extra Heavy LLDPE Flat Bag, 2.75 Mil | 200/CS

LK® 9F2436 – 24×36 TUF-R® Extra Heavy LLDPE Flat Bag, 2.75 Mil | 200/CS

The LK® 9F2436 is a 24-inch by 36-inch open-top flat bag made from TUF-R® Extra Heavy LLDPE film at 2.75 mil. Cases of 200 bags support industrial, food distribution, and specialty packaging operations requiring a wide tall rectangular format at maximum-gauge film protection. The 24-inch width and 36-inch depth make the 9F2436 one of the largest rectangular formats in the TUF-R® Extra Heavy flat bag line, designed for full-length, oversized, and bulky goods that smaller formats cannot contain. Open-top construction is compatible with heat sealing, impulse sealing, or fold-and-tape closure.

What packaging applications match the 24×36 format in extra-heavy poly bags?

A 24-inch width and 36-inch depth handles the widest and longest goods that require extra-heavy flat bag protection. Food distributors bag full pork loins, large whole leg roasts, extended brisket sections, and oversized vacuum-pack overwraps where primal cuts are grouped together. Industrial users bag wide aluminum extrusion bundles, long sheet metal strips, rigid electrical conduit, and extended rubber gasket rolls. Sign fabricators and graphics distributors use the 24×36 format for large flexible banner sections, wide vinyl substrate rolls, and oversize foam board panels. Garment operations bag wide formal wear, jumbo folded coveralls, and extra-tall outerwear that even 18-inch-wide bags cannot accommodate without edge compression.

2.75 Mil TUF-R® Extra Heavy LLDPE Film: Maximum-Gauge Puncture Resistance

At 2.75 mil, TUF-R® Extra Heavy LLDPE provides the highest available gauge in the TUF-R® flat bag series. For large formats like the 9F2436, film strength at the bottom seal and along both side edges is essential because wide, long, and heavy contents create multi-directional stress during palletizing and forklift handling. LLDPE’s high elongation at break allows the 2.75 mil film to absorb these stresses without propagating tears from corner points or sharp content edges. The film heat-seals cleanly on standard impulse and bar sealers for moisture-resistant tamper-evident closures.

Full-Length Standard Door Panel and Cabinet Substrate Overwrap

Cabinet manufacturers, door distributors, and millwork suppliers packaging standard 24-inch-wide door slabs, cabinet panel blanks, and wide slab sections need a bag that accepts the full panel width without forcing the film to roll under the edge, which traps abrasive dust against the face surface. The 9F2436 at 24 inches wide fits standard interior door blank and cabinet panel widths with controlled clearance, while the 36-inch depth accommodates full panel heights when folded once. At 2.75 mil, the bag withstands the sharp routed edge profiles, stapled face hardware, and veneer tab edges that regularly breach lighter-gauge film during warehouse rack storage and transit loading, protecting finished panel surfaces from cosmetic damage through the distribution chain.

Ordering LK® 9F2436 in Cases of 200 from NFC Bags

NFC Bags stocks LK® 9F2436 in cases of 200 bags for industrial, food distribution, and specialty packaging accounts requiring a large wide tall extra-heavy flat bag. The 24×36 format at 2.75 mil is maintained in active inventory for reliable short lead times on single-case and volume orders. Volume pricing is available for 10-case and larger orders; contact NFC Bags for pallet-quantity rates for distribution center and manufacturing accounts with sustained demand.

FDA Compliance and Recyclability of TUF-R® Extra Heavy LLDPE Flat Bags

TUF-R® Extra Heavy LLDPE film meets FDA food-contact compliance standards, qualifying the 9F2436 for direct-contact packaging of raw and processed food products. The film contains no BPA, phthalates, or added plasticizers. As an LLDPE #4 resin, used 9F2436 bags are eligible for polyethylene film drop-off recycling at participating retail collection points, providing a practical sustainable disposal option for food service and industrial users generating regular bag volumes.