LK® 7F2442 – 24×42 LLDPE Flat Bag | 1,000/CS

LK® 7F2442 – 24×42 TUF-R® Standard LLDPE Flat Bag, 1,000/CS

The LK® 7F2442 is a 24-inch by 42-inch open-top flat bag made from 1.25 mil TUF-R® Standard LLDPE film. At two feet wide and three and a half feet deep, this is one of the largest standard flat bags in the LK® lineup — built for packaging long, wide items that most poly bags cannot accommodate. Each case contains 1,000 bags. At 1.25 mil, the film delivers the strength required for demanding industrial, agricultural, and food service applications at scale.

What Makes the 24×42 Necessary?

Products that require both 24 inches of width and 42 inches of length represent an underserved segment in standard packaging. The extra depth over 24×36 and 24×38 bags makes a meaningful difference for long items that need a clean seal above the product — rather than a tight closure right at the top edge of the contents. The 1.25 mil gauge adds film strength appropriate for heavier, more abrasive, or sharper products that would puncture a lighter bag at this size.

FDA-Compliant for Large-Format Food Packaging

TUF-R® LLDPE meets FDA requirements for direct food contact. The 24×42 size is used for institutional-scale packaging including whole large fish, commercial poultry, oversized bulk produce, and long-format prepared food items. Its combined length and width accommodates products that institutional food service operators cannot fit into standard retail-size packaging without folding or compression.

24×42 Flat Bags for Full-Length Mirrors, Extra-Wide Snowboards, and 42-Inch Commercial Signage Panels

The 42-inch depth serves industries dealing with genuinely oversized products. Framed full-length wall mirrors — narrow in width but tall — fit in the 24-inch opening and the 42-inch depth provides edge-to-edge film coverage without exposed corners. Snowboards and wakeboards at or near the 42-inch length mark fit cleanly for retail display bagging and storage protection between seasons. Commercial sign shops and display companies use this format to protect printed panels, foam boards, and trade show graphic inserts during transit and setup, where the extra bag length allows sealing well above the panel edges for maximum protection.

Stocked at NFC Bags – Large Format, Ready to Ship

LK® 7F2442 bags are available in cases of 1,000 from NFC Bags with no minimum order requirements. The extended format is in stock and ships without lead time, making it practical for both planned production runs and urgent restocking. NFC Bags serves manufacturing, food, and retail operations that depend on reliable large-format flat bag inventory.

Recyclable Heavy-Gauge PE Film

TUF-R® LLDPE at 1.25 mil is fully recyclable as PE film. The clean, single-resin construction means no sorting, no layer separation, and no contamination when placed in a retail PE film drop-off bin. Large users can consolidate and recycle in bulk through film recycling service providers at no additional preparation cost.