LK® 8F0306 – 3×6 TUF-R® Heavy LLDPE Flat Bag, 1.8 Mil | 3,000/CS

LK® 8F0306 — 3×6 TUF-R® Heavy LLDPE Flat Bag, 1.8 Mil, 3,000 per Case

The LK® 8F0306 is a 3-inch by 6-inch clear LLDPE flat bag made from TUF-R® Heavy film at 1.8 mil gauge, sold in cases of 3,000. The 3×6 format provides a tall, narrow bag profile suited for circuit board sub-kits, longer tool bits, artisan spice blends, and single-serve specialty retail portions where a 5-inch bag would be too short for a clean seal. At 1.8 mil, TUF-R® Heavy LLDPE delivers the film strength and puncture resistance needed for demanding industrial and specialty food applications in this format.

3×6 vs. 3×5 — When the Extra Inch of Length Matters

Moving from 3×5 to 3×6 adds the extra inch needed for PCB sub-assemblies with protruding headers, longer spice or herb portions in flat-lay presentation, or tool bit sets where individual bits are 4.5–5 inches long. The additional length allows these items to lay flat inside the bag without bending while preserving 1–1.5 inches of headroom above the top of the product for a clean heat seal line. For retail confectionery and spice applications, the 6-inch length also creates room for a product label below the seal and above the product, improving brand presentation.

TUF-R® Heavy LLDPE at 1.8 Mil — Circuit Board and Tool Bit Packaging Film Performance

PCB sub-assemblies and precision tool bits have sharp protruding pins and cutting edges that can puncture standard-duty poly bags during automated kitting or shipping. TUF-R® Heavy LLDPE at 1.8 mil provides the increased wall thickness needed to contain these sharp features without film failure. The elongation properties of LLDPE allow the film to flex around irregular board or tool profiles without cracking or splitting, maintaining bag integrity from the initial pack through end-use handling at the assembly station or tool crib.

3×6 Heavy 1.8 Mil LLDPE Bags for PCB Assembly Sub-Kits, Artisan Spice Blends, and Small Tool Bit Sets

Electronics contract manufacturers and PCB assembly shops bag individual board sub-kits — a set of matched capacitors, resistors, and IC chips for a single board position — in the 3×6 heavy bag, where the 6-inch length accommodates longer component bodies and the 1.8 mil film resists lead wire puncture during high-speed kitting line operation. Artisan spice producers and specialty food companies bag 1–2 oz. portions of smoked paprika, za’atar, or custom spice blends in the 3×6 format, with the tall narrow profile providing an attractive retail presentation and the clear film displaying the spice color. Tool crib operators and precision tool distributors bag individual router bit sets, hex key collections, and drill bit assortments in this size, with the heavy film resisting sharp cutting edge penetration during storage and shipping.

In-Stock at NFC Bags — Cases of 3,000 Available Now

LK® 8F0306 ships from NFC Bags’ warehouse in cases of 3,000. Electronics manufacturers, artisan food producers, tool distributors, and specialty retail operations can order single cases for small volume needs or establish multi-case volume purchasing. Volume pricing is available. Order at NFCBags.com or contact the NFC Bags sales team for pricing and shipping details.

FDA-Compliant LLDPE for Food, Industrial, and Specialty Retail Applications

LK® 8F0306 uses FDA-compliant LLDPE film cleared for direct food contact with spices, specialty food portions, and other food items, as well as industrial and precision component applications. The film contains no restricted plasticizers or additives and meets applicable FDA food contact material requirements. LLDPE is recyclable through Store Drop-Off programs (resin code #4) when bags are clean and dry.