30 x 20 x 35 Walker/Wheelchair/Commode Equipment Cover on Roll – 1.5 Mil

30 x 20 x 35 Walker/Wheelchair/Commode Equipment Cover on Roll – 1.5 Mil

The BORR302035 is a 30″ wide × 20″ gusset × 35″ long gusseted polyethylene equipment cover on a roll designed for walkers, wheelchairs, and commodes in healthcare delivery, DME supply, and home health environments. The 30″ nominal width and 20″ gusset expand to provide approximately 70″ of circumferential coverage — sufficient to enclose standard and wide-frame rollators, transport wheelchairs, standard wheelchairs, and commode chairs in a top-entry or side-entry drape configuration. At 1.5 mil, the cover provides meaningful durability improvement over standard 1 mil mobility equipment covers, particularly at contact points with metal wheel hubs, footrest brackets, and armrest hardware.

What Mobility Equipment Does the BORR302035 Cover?

The 30″ width with 20″ gusset accommodates standard wheelchairs (24–26″ wide), rollators and four-wheeled walkers (22–26″ wide), and commode chairs (18–22″ wide) with adequate coverage and minor overhang for securing at the base. The 35″ height provides full top-to-seat-level coverage when draped over the back of a wheelchair or commode, protecting the primary use surfaces from dust, moisture, and incidental contact during transport and storage staging cycles.

Why Gusseted Construction Over Flat for Walker and Wheelchair Covers?

Walkers and wheelchairs have irregular cross-sections — armrests, wheel hubs, footrest panels, and anti-tip bars protrude beyond the simple rectangular silhouette that a flat cover assumes. A 20″ gusset allows the BORR302035 to expand around these protrusions rather than stretching tight against them, reducing the tearing stress at contact points and ensuring the cover seats cleanly over the full equipment profile without leaving gaps at armrests or footrests that would expose equipment surfaces to contamination.

Shower Chair and Transfer Bench Storage During Facility Renovation Application

Hospital facilities teams and outpatient rehab clinics use gusseted mobility equipment covers in the BORR302035 size range to protect shower chairs, transfer benches, and tub transfer seats during building renovation projects that generate drywall dust, paint spray, and construction debris. A single-use poly cover applied at the start of a renovation period and removed before patient use eliminates the thorough wipe-down that uncovered equipment requires after construction — reducing room re-commissioning labor and accelerating return to patient care service.

How Does 1.5 Mil Improve Durability on Mobility Equipment Covers?

Standard mobility equipment covers in this product category typically run 1 mil. At 1.5 mil, the BORR302035 adds approximately 50% additional film thickness at wheel hub contact points, footrest bracket corners, and locking lever protrusions — the zones where 1 mil covers most frequently tear during application and removal. For operations with high daily cover volumes (home health delivery fleets, DME rental depots), reduced cover failure rates translate directly to lower per-unit cover cost and reduced labor for cover reapplication after failures.

What Is the Roll Pack Quantity for BORR302035?

Contact NFCbags.com for roll pack quantities, case pricing, and volume purchase programs for DME rental companies, home health agencies, hospital equipment departments, and outpatient rehabilitation facilities with ongoing walker, wheelchair, and commode cover requirements in the BORR302035 size profile.