LK Packaging HDN3340 33 x 40 High-Density 33 Gallon Trash Can Liner

LK Packaging HDN3340 High-Density Trash Can Liner – 33 x 40 Inch 33 Gallon Waste Bag

The LK Packaging HDN3340 is a 33 × 40 inch high-density trash can liner sized for 33 gallon waste receptacles—the standard large trash can size used throughout restaurants, commercial kitchens, food service operations, hotels, and institutional facilities. High-density polyethylene construction provides puncture resistance and tensile strength for the higher-volume commercial waste streams generated in the primary large-can janitorial size. Available by the case for restaurant, food service, janitorial service, and commercial facility programs requiring consistent supply of 33-gallon liner specifications.

What Are the Specifications of the HDN3340?

The HDN3340 measures 33 inches wide by 40 inches tall, providing the dimensions to line standard 33-gallon round and square waste receptacles used as the primary janitorial trash can in restaurant kitchens, hotel service areas, institutional food service operations, and commercial facilities where the 33-gallon is the baseline large-can specification. High-density polyethylene film provides the strength-to-cost efficiency that makes HDPE the standard liner material for dry-to-light-moist commercial waste in the 33-gallon container size across food service and institutional markets.

Is the HDN3340 Appropriate for Restaurant Kitchen Applications?

The standard-gauge HDN3340 is appropriate for restaurant kitchen waste that is predominantly dry or lightly moist—wrappers, packaging, paper, and light food scraps typical of food prep stations without heavy liquid waste. For restaurant kitchen locations generating heavy wet waste, greasy food scraps, or sharp packaging that consistently punctures standard-gauge HDPE liners, the HDN3340HD heavy-duty variant provides additional gauge and puncture resistance in the same 33 × 40 inch format. Use the standard HDN3340 for front-of-house and dry prep area trash cans, and specify the HDN3340HD for heavy back-of-house kitchen waste locations where liner failures are a documented issue.

Restaurant Kitchen and Food Service Back-of-House 33 Gallon Standard Trash Can Liner Program

Restaurant operators and food service management companies maintaining consistent liner programs across multiple locations specify the HDN3340 as the standard 33-gallon liner for kitchen and service area waste containers. Stocking the HDN3340 in case quantities at each location ensures kitchen staff always have liners available for routine container changes without the service disruptions that occur when liner supply runs out during peak service periods. For multi-location restaurant operators, standardizing on the HDN3340 across the portfolio simplifies procurement, eliminates substitute liner quality variability, and allows consolidated purchasing at volume pricing across all locations.

Does HDPE Work for 33 Gallon Food Service Applications?

High-density polyethylene provides adequate performance for dry and light-moist food service waste in 33-gallon containers used in front-of-house dining areas, dry storage, and dry prep station applications. For heavy wet kitchen applications—high-volume food scrap buckets, grease-adjacent waste containers, or sharp packaging waste from industrial food prep—HDPE’s lower elongation at break makes it more susceptible to stress failure under heavy liquid and sharp-edge loads than low-density alternatives. Match the HDN3340 to your kitchen waste type, and consult LK Packaging if your application requires low-density or can liner specifications for wet or abrasive waste.

Where Can I Order LK Packaging HDN3340 Trash Can Liners?

LK Packaging HDN3340 high-density 33-gallon trash can liners are available through NFCbags.com with case pricing for restaurant, food service, and commercial facility programs. Contact LK Packaging for case pack quantities, pricing, and availability for your 33-gallon waste container liner program.