LK® 8G042010 – 4×2×10 TUF-R® Heavy LLDPE Gusset Bag, 0.85 Mil | 1,000/CS

LK® 8G042010 — 4×2×10 TUF-R® Heavy LLDPE Gusset Bag, 0.85 Mil, 1,000/CS

The LK® 8G042010 is a 4-inch by 2-inch by 10-inch side gusset bag made from 0.85 mil TUF-R® Heavy LLDPE film, packed 1,000 per case. TUF-R® Heavy is LK Packaging’s heavy-duty LLDPE gusset line delivering greater puncture resistance and seal strength than standard-duty gusset film. The 4×2×10 format provides additional length compared to the 4×2×8, accommodating elongated contents that require gusset capacity alongside extra length. The open-top construction accepts heat sealing, impulse sealing, or twist-tie closure for both manual and automated packaging operations.

What Advantages Does the Side Gusset Provide in the 4×2×10 Format?

The 2-inch gusset on a 4×2×10 bag creates a usable interior cross-section substantially greater than a 4×10 flat bag, which is essential when contents are moderately bulky in addition to being elongated. The gusset expands on filling to provide a self-supporting, squared bag profile that holds contents flat and prevents component shift during transit. For multi-piece kits where length and volume matter simultaneously — tool sets, instrument packs, or multi-component hardware kits — the gusset format fits more content per bag without requiring a step up to a wider flat bag that would waste film on a narrow-footprint item.

TUF-R® Heavy LLDPE Film Properties — 0.85 Mil Gauge

TUF-R® Heavy gusset bags are produced from 100% LLDPE at 0.85 mil nominal gauge. The film provides greater puncture resistance and tear strength than standard-duty LLDPE gusset film, which is particularly important at the gusset fold lines where repeated flex stress from fill loading can cause fatigue failures in thinner film. The material is optically clear for content inspection, heat-sealable consistently on all standard jaw and band sealers, and free of coatings, barrier layers, or plasticizers.

Drill Bit, Cutting Tool, and Precision Instrument Packaging in the 4×2×10 Format

The 4×2×10 gusset bag is a proven format for packaging individual drill bits, router bits, and small cutting tools for industrial and consumer distribution. Drill bit flutes and cutting edges are precisely the type of sharp surface contact that causes pinholes and tears in standard-duty poly bags on the filling line, in transit, and during retail display handling. The 0.85 mil TUF-R® Heavy gauge withstands this contact without failing, maintaining a clean presentation through fulfillment and to the end customer. The gusset provides volume for blister card backer packaging, protective sleeves, and tool documentation included with precision instruments, and the clear film allows product inspection and barcode scanning without opening the bag.

Ordering LK® 8G042010 — 1,000/CS | In Stock at NFC Bags

The LK® 8G042010 is stocked domestically and ships from U.S. distribution. Cases of 1,000 are available for immediate order through NFC Bags. Volume pricing at multi-case and pallet quantities is available — use the quantity selector at checkout or contact the NFC Bags team for tool, industrial, and specialty retail packaging volume quotes. NFC Bags is an authorized LK Packaging distributor for the TUF-R® gusset bag product line.

FDA Compliance and Recyclability of TUF-R® Heavy LLDPE Gusset Bags

TUF-R® Heavy LLDPE gusset bag film is FDA-compliant under 21 CFR for direct food contact, qualifying it for food packaging applications alongside industrial, tool, and retail uses. The 100% LLDPE single-resin construction carries resin identification code #4 (LDPE) and is accepted at retail plastic film drop-off locations for recycling when clean and dry. No coatings, barrier layers, or colorants are present in the film formulation.