50 x 45 Walker/Wheelchair/Commode Equipment Cover on Roll – 1 Mil

50 x 45 Walker/Wheelchair/Commode Equipment Cover on Roll – 1 Mil

The BOR5045 is a 50″ × 45″ flat polyethylene equipment cover on a roll designed specifically for walkers, wheelchairs, and commodes in healthcare delivery, home health, and DME service environments. The 50″ width provides full side-to-side coverage for standard and wide-frame wheelchairs, four-wheeled walkers, and commode chairs without excess material overlap, while the 45″ length covers the full height from seat to footrest platform on most standard mobility equipment profiles. At 1 mil, the cover is lightweight, economical, and easy to apply single-handedly during rapid equipment preparation cycles.

What Mobility Equipment Dimensions Does the BOR5045 Cover?

Standard wheelchairs range from 24″ to 30″ wide, and commodes and walkers typically run 22″ to 28″ wide — all well within the 50″ flat width of the BOR5045. The 45″ length covers the full height of a standard wheelchair (seat height approximately 18″ + back height up to 42″ depending on model), providing adequate coverage for the full equipment silhouette when the cover is draped over the top and secured at the base. Bariatric wheelchair models up to 30″ wide are also accommodated within the 50″ flat panel.

Why Is 1 Mil the Standard Gauge for Walker and Wheelchair Covers?

Walker and wheelchair covers are typically single-use, high-turnover protection items used during delivery, storage, and inter-facility transport — applications where cover cost-per-use is a primary procurement consideration and where equipment surfaces are relatively smooth with limited puncture risk. At 1 mil, the BOR5045 provides adequate moisture and dust exclusion for the duration of transport and short-term storage without the cost premium of heavier gauges that are unnecessary for the application.

Mobility Scooter and Power Chair Post-Assembly Finish Protection Application

Power mobility scooter and electric wheelchair manufacturers and dealers use flat equipment covers in the BOR5045 size range to protect freshly assembled or repainted units during quality inspection, staging, and pre-delivery holding. The poly cover prevents finger smudges, dust settlement on upholstered seats, and incidental contact scratches on painted or powder-coated frames between final assembly and customer handoff — preserving the first-impression quality that drives customer satisfaction scores and reduces pre-delivery reconditioning labor.

How Does the BOR5045 Support DMEPOS Compliance in Home Health Delivery Operations?

CMS DMEPOS supplier standards require that mobility equipment delivered to beneficiaries be clean, functional, and in good repair. Using single-use covers during transport and pre-delivery staging demonstrates that equipment was protected from contamination between prior patient use and new patient delivery — supporting infection prevention documentation and audit readiness for DMEPOS accreditation site visits by organizations like ACHC and The Joint Commission.

What Is the Roll Pack Quantity for BOR5045?

Contact NFCbags.com for roll pack quantities, case pricing, and volume purchase programs for home health agencies, DME rental and delivery operations, hospital equipment management departments, and healthcare group purchasing organizations with ongoing walker, wheelchair, and commode cover needs.