LK® BCT6-08 – 8″ × 500 ft Class 100 Clean Room Tubing | 6 Mil | 1 Roll/CS

LK® BCT6-08 – 8″ × 500 ft Class 100 Clean Room Tubing | 6 Mil | 1 Roll/CS

The LK® BCT6-08 is an 8″-wide, 500-foot roll of 6 mil Class 100 clean room tubing manufactured in a certified ISO Class 5 (Class 100) clean room. Extruded from barefoot virgin polyethylene resin that meets FDA standards, the tubing is wound on a sturdy plastic core and double-bagged upon packaging to maintain clean room integrity through delivery. Each case contains one 500-foot roll, providing a heavy-wall tubing format for precision clean room component sleeving in pharmaceutical, medical device, and semiconductor environments.

What industries and components use 8″ Class 100 clean room tubing?

The 8″ flat-width format sleeves components up to approximately 2.5″ in diameter, accommodating flexible endoscope shafts, precision robotic actuators, catheter delivery systems, cylindrical laboratory sensors, semiconductor process tubes, and medical imaging probe assemblies. Minimally invasive device OEMs, surgical instrument manufacturers, diagnostic imaging suppliers, and precision automation producers use BCT6-08 where a slightly wider tube is needed for larger-diameter clean room components without moving to a medium-format roll.

6 Mil Wall: Enhanced Puncture Resistance for Critical Component Packaging

The BCT6-08’s 6 mil wall provides meaningful additional resistance to puncture, compression, and abrasion compared to the 4 mil BCT4 series — an advantage when sleeving components with sharp edges, exposed connector pins, or surface finishes that must arrive at assembly without micro-scratches or contamination. Produced from 100% barefoot virgin PE with no additives, the film maintains the outgassing and particle emission profile required for ISO Class 5 and Class 6 clean environments.

Sterile Drape Sleeving for Surgical Instrument Kits and Endoscope Assemblies

Surgical instrument reprocessing facilities and medical device OEMs routinely need to sleeve individual instruments — laparoscopic tools, flexible endoscopes, trocar assemblies — in clean room-certified tubing before final packaging for sterilization. BCT6-08’s 8″ flat width and 6 mil wall make it practical for this step: operators cut the tube to instrument length, seal one end before insertion and the other after, creating a documented clean room-certified pre-sterilization sleeve that does not require sourcing custom bags for each instrument profile.

Ordering LK® BCT6-08 in Cases of 1 Roll (500 ft) from NFC Bags

NFC Bags stocks the LK® BCT6-08 Class 100 clean room tubing and ships single-roll cases of 500 feet to medical device OEMs, surgical instrument facilities, semiconductor manufacturers, and precision automation suppliers nationwide. Multi-roll volume pricing is available for high-throughput operations. Contact NFC Bags for lead times, freight options, and quantity break pricing on the BCT6-08 and the full LK® clean room tubing program.

FDA Compliance and Clean Room Certification of LK® Class 100 Tubing

LK® BCT6-08 clean room tubing is manufactured from FDA-compliant virgin polyethylene resin, qualifying it for pharmaceutical, medical device, and food-contact component packaging. All production occurs within a certified Class 100 (ISO 5) clean room, and every roll is double-bagged upon packaging to prevent contamination during transit and storage — satisfying the cleanliness chain-of-custody requirements of regulated medical device and semiconductor manufacturing supply chains.