Autobag 6″ X 8″ 3 mil Pre-opened Bags on a Roll 1000 per Roll

Electronic Parts & PCB Kit Auto-Bag Rolls — 6″x8″, 3 mil LDPE

These 6″x8″ pre-opened bags on rolls at 3 mil are designed for automated bagging lines packaging electronic components, printed circuit boards, small hardware kits, and similar items that require a heavier gauge for puncture resistance against sharp edges and connectors. Each roll contains 1,000 pre-opened bags manufactured from 100% virgin LDPE meeting FDA/USDA specifications. The durable bottom seal and extra-strength side seals maintain bag integrity at production cycling speeds common in electronics and hardware kitting operations.

Specs: 6″ x 8″ | 3 mil | LDPE | 1000/Roll | Pre-Opened | FDA/USDA Compliant

Applications

• Printed circuit board (PCB) and electronic component kit packaging
• Small hardware kit bagging (drill bit sets, hex key sets, fastener kits)
• Power tool accessory and consumer electronics accessory packaging
• Cosmetic kit and personal care product set packaging
• Promotional merchandise and trade show supply kit packaging

Features

• Pre-opened format compatible with automated bagging machines and poly baggers
• 3 mil heavy-gauge construction — puncture-resistant for sharp-edged components and hardware
• 1,000 bags per roll for extended automated line production runs
• 100% virgin LDPE meeting FDA/USDA specifications
• Durable bottom seal and extra-strength side seals for high-cycle production
• Open end supports heat sealing, stapling, or taping after fill

Material Notes

Manufactured from 100% virgin low-density polyethylene (LDPE) resin meeting FDA/USDA specifications. The 3 mil gauge provides puncture resistance appropriate for packaging electronic components, PCBs, and hardware kits where sharp edges or connector pins could compromise lighter gauges during production. All listed gauges are nominal.

Use Case Notes

The 6×8 format at 3 mil is commonly specified in electronics kitting and hardware packaging operations where items have sharp points, edges, or connectors that require heavier film. The 3 mil weight also provides additional protection against friction and abrasion damage for polished or sensitive component surfaces. At 1,000 bags per roll, this format supports moderate-to-high throughput automated bagging lines with reduced changeover frequency.

Common Questions

Q: Are these compatible with automated bagging machines?
A: Yes. These are pre-opened bags on rolls (POBR) designed for automated poly bagging machines. Verify roll diameter and core specifications against your machine requirements before ordering.

Q: Are these FDA compliant?
A: Yes. Manufactured from LDPE resin meeting FDA/USDA specifications.

Q: How many bags per roll?
A: 1,000 pre-opened bags per roll.

Q: Why 3 mil for a 6×8 bag?
A: The 3 mil gauge is specified for applications where bag contents (electronics, hardware, or components) have sharp edges or points that would puncture lighter 1.5 or 2 mil film at production speeds.

Why Buy

Electronics manufacturers, hardware kitters, and promotional product packagers that run automated bagging lines for small, sharp-edged items need a POBR format that won’t fail at production speed. The 6×8 at 3 mil provides the puncture resistance and bag strength required for PCB kits, fastener sets, and component packaging without stepping up to larger bag formats. At 1,000 per roll with LDPE construction meeting FDA/USDA specifications, this format supports kitting operations across electronics, hardware, and consumer goods categories.