This 60″ flat-lay LDPE poly tubing is manufactured at 4 mil thickness from 100% virgin Low Density Polyethylene resin. The wide-format roll allows users to cut custom-length covers on demand, making it well-suited for pallet overwrapping, large machinery covers, and protective sleeving of oversized industrial items.
Specs: 60″ Flat-Lay (approx. 120″ circumference) | 4 mil | LDPE | FDA Compliant | 3-in. Core | 350 FT/Roll
Applications
- Pallet overwrap and load protection during storage or transit
- Industrial machinery and equipment covers
- Large furniture and upholstered goods protective sleeving
- Boat, ATV, and equipment seasonal storage covers
- Construction and renovation dust and moisture barrier
- Custom-cut bundling sleeves for oversized components
Features
- 60″ flat-lay width — opens to approximately 120″ circumference (approx. 38″ diameter)
- 4 mil thickness — heavy-duty puncture and tear resistance
- FDA/USDA compliant LDPE resin
- Neatly wound on a 3″ core with 1″ diameter core plug
- Cut to any length; heat seal, tie, staple, or tape to close ends
- 350 FT per roll for extended production or large-coverage runs
Material Notes
Low Density Polyethylene (LDPE) tubing at 4 mil provides a balance of flexibility and puncture resistance suitable for covering or protecting large, irregularly shaped items. Even wall thickness across the full 60″ width ensures consistent barrier performance. FDA/USDA compliant for direct food contact if needed, though primary use cases are industrial and protective.
Use Case Notes
When laid flat at 60″ and opened, this tubing forms a tube approximately 38″ in diameter — sufficient to slip over standard 40″ x 48″ pallets, large equipment bases, or wide machinery footprints. Cutting a length of tubing and heat-sealing one end creates a custom slip-cover without the lead time of fabricated bags. For pallet applications, the standard approach is to cut a length equal to twice the pallet height plus 24″ for overlap, then seal and tuck at the base.
Common Questions
Q: What diameter item can this tubing accommodate?
A: At 60″ flat-lay, the tubing circumference is approximately 120″, corresponding to a maximum interior diameter of roughly 38″. Items narrower than 38″ in cross-section will slide in with ease; bulkier items may require slitting one side to create a flat sheet instead.
Q: Can I use this as flat sheeting instead of a tube?
A: Yes. Slitting one edge of the tubing with a knife or scissors converts it into a flat sheet approximately 120″ (10 ft.) wide, usable for drop cloths, surface protection, or custom wrapping applications.
Why Buy From Us
Wide-format poly tubing in industrial-duty 4 mil gauge, stocked for immediate fulfillment at wholesale pricing. Virgin LDPE, consistent wall thickness, 3-in. core for standard dispensing equipment.
Reviews
There are no reviews yet.