Clear Poly Tubing 6 mil 13″X 6 mil 900’/roll

PVC Pipe Sleeving & Large Conduit Tubing 13-in. — 6 mil LDPE

Extra-heavy 6 mil LDPE poly tubing with a 13-inch flat-lay width for sleeving large-diameter PVC pipe, electrical conduit, and industrial components. Opens to approximately 8.3 inches in diameter for coverage of 6–8 inch pipe or conduit. Manufactured from 100% virgin Low Density Polyethylene resin meeting FDA and USDA specifications. 900 feet per roll on a 3-inch core with 1-inch plug.

Specs: 13 in. flat-lay | 6 mil | LDPE | 900 FT/Roll | FDA compliant

Applications

• 6–8 inch PVC pipe corrosion and abrasion sleeving
• Large electrical conduit protection in storage and transit
• Steel pipe and structural tube mill-roll sleeving
• Oversized metal bar and extrusion profile wrap
• Heavy-duty bundling for large-diameter hose and flexible duct

Features

• 6 mil extra-heavy gauge: maximum puncture and abrasion resistance
• 13-inch flat-lay opens to approximately 8.3-inch interior diameter
• Heat-sealable, tie-closeable, or staple-closeable ends
• Even wall thickness for consistent protection along full length
• 3-inch core with 1-inch plug fits standard dispensing stands

Material Notes

LDPE at 6 mil provides the highest gauge available in standard poly tubing, suited for applications where lighter gauges would fail under abrasion from pipe threads, conduit fittings, or rough surfaces. Virgin resin formulation meets FDA and USDA contact specifications for incidental food contact.

Use Case Notes

The 13-inch flat-lay width opens to an approximately 8.3-inch open diameter, accommodating most 6-inch nominal PVC or steel pipe with standard wall schedules. For conduit bundles or fluted structural profiles, the 6 mil gauge withstands contact with sharp edges during insertion and storage. Seal ends with a heat sealer or tie-wrap for transit; leave open for on-site slip-cover applications.

Common Questions

What diameter pipe fits in 13-inch poly tubing?
A 13-inch flat-lay width opens to approximately 8.3 inches in diameter, accommodating 6-inch nominal pipe (actual OD ~6.625 in.) and 8-inch nominal pipe (actual OD ~8.625 in. with some tension) depending on wall schedule and profile.

Can this be used as a continuous extrusion sleeve?
Yes. The tubing unrolls continuously and can be cut to length on-site. It can be slit down one edge to create a flat protective sheet approximately 26 inches wide.

Is this FDA compliant?
Yes. Manufactured from virgin LDPE resin meeting FDA and USDA specifications for incidental food contact.

Why Buy

At 6 mil and 900 feet per roll, this is a high-yield heavy-duty sleeving solution for industrial pipe, conduit, and large structural profile protection. The extra-heavy gauge delivers reliable performance in environments where standard 2–4 mil tubing wears through quickly on rough or threaded surfaces.