LK® BCT6-06 – 6″ × 500 ft Class 100 Clean Room Tubing | 6 Mil | 1 Roll/CS

LK® BCT6-06 – 6″ × 500 ft Class 100 Clean Room Tubing | 6 Mil | 1 Roll/CS

The LK® BCT6-06 is a 6″-wide, 500-foot roll of 6 mil Class 100 clean room tubing manufactured in a certified ISO Class 5 (Class 100) clean room. Produced from barefoot virgin polyethylene resin meeting FDA standards, the tubing is wound on a sturdy plastic core and double-bagged for cleanliness assurance through delivery. Each case contains one 500-foot roll in a narrow, heavy-wall format designed for precision clean room component sleeving and packaging.

What industries and components use 6″ Class 100 clean room tubing?

The 6″ flat-width format sleeves components up to approximately 1.9″ in diameter, making it ideal for hypodermic needles and syringes, precision catheter shafts, small optical lenses and barrels, endoscope insertion tubes, calibrated lab pipettes, and microelectronics carrier rods. Pharmaceutical manufacturers, minimally invasive device OEMs, optical instrument producers, and semiconductor fabrication facilities use BCT6-06 for narrow-format on-demand sleeving in ISO 5 and ISO 6 clean environments.

6 Mil Heavy-Wall Film: Puncture Resistance for Delicate Narrow Components

At 6 mil, BCT6-06 is the thicker-wall option in the LK® Class 100 clean room tubing line, providing enhanced puncture resistance and column strength relative to the 4 mil BCT4 series. This heavier gauge is preferred for components where accidental compression or point-load impact could damage fragile surfaces — such as polished optical lenses, precision-ground shafts, and single-use medical device tips. The barefoot virgin PE resin construction eliminates additive outgassing concerns in tightly controlled clean environments.

Single-Use Sterile Packaging for Pharmaceutical and Medical Device Components

In pharmaceutical and single-use medical device manufacturing, the narrow profile and heavy-wall construction of BCT6-06 make it well suited for on-demand sterile sleeving of components entering clean assembly or packaging lines. The Class 100 production environment, combined with the double-bagged roll packaging, provides the documented cleanliness traceability required for components that must arrive at sterile assembly without an additional pre-wash step.

Ordering LK® BCT6-06 in Cases of 1 Roll (500 ft) from NFC Bags

NFC Bags stocks the LK® BCT6-06 Class 100 clean room tubing and ships single-roll cases of 500 feet to pharmaceutical manufacturers, medical device OEMs, semiconductor facilities, and precision instrument producers nationwide. Multi-roll volume pricing is available. Contact NFC Bags for lead times, freight options, and quantity pricing on the BCT6-06 and the complete LK® clean room tubing line.

FDA Compliance and Clean Room Certification of LK® Class 100 Tubing

LK® BCT6-06 clean room tubing is produced from FDA-compliant virgin polyethylene resin suitable for direct contact with pharmaceutical and food-contact components. Manufacturing takes place entirely within a certified Class 100 (ISO 5) clean room, and each roll is double-bagged upon completion to maintain contamination-free integrity through shipping and storage — providing the cleanliness documentation required for regulated manufacturing supply chains.