Clear HDPE Liners 30″ x 37 13 Microns

Clear Prime HDPE Liners for Office and Break Room Wastebaskets

These 30×37 in. clear HDPE liners are sized for 20–30 gallon desk-side and break room wastebaskets. High-density polyethylene construction delivers extra strength at lighter gauge compared to LDPE — providing reliable liner performance at a lower material weight and cost per unit.

Specs: 30 x 37 in. | 0.51 mil (13 Micron) | 100% Prime HDPE | 20–30-Gal Capacity | Star-Seal Bottom | Clear | Dispenser Box

Applications

Office desk-side and floor wastebasket liners; break room and kitchen step-can liners; small conference room and restroom waste receptacle liners; retail fitting room and back-office trash collection; light commercial waste management.

Features

Prime HDPE resin provides higher tensile and puncture resistance than standard LDPE at equivalent gauge, reducing liner failures under normal office waste loads. Star-seal bottom distributes weight evenly across the liner base, preventing tear-out at the seal. Clear film allows contents visibility for quick sorting without opening. Dispenser box enables clean, single-liner pull for facility maintenance carts and supply closets.

Material Notes

High-density polyethylene (HDPE) is stiffer and lighter per unit volume than LDPE or LLDPE. At 0.51 mil (13 micron), prime HDPE delivers performance comparable to 1.0–11.5 mil LDPE for light waste loads. Does not contain recycled content. Star-sealed bottoms on all liners.

Use Case Notes

The 30×37 in. format fits standard 20–30 gallon round and rectangular wastebaskets commonly used in office environments. Clear film supports office recycling programs where contents must be visually identifiable. HDPE construction crinkles slightly compared to LLDPE but provides good tear resistance for typical paper, plastic, and light food waste.

Common Questions

Q: How does HDPE compare to LDPE or LLDPE for trash liners?
A: HDPE is stiffer, lighter, and less elastic than LDPE or LLDPE, but provides higher tensile strength per unit gauge. HDPE liners are best suited for light, dry waste loads. LLDPE is preferred for heavy or irregular waste that requires stretch resistance.

Q: Are these safe for food waste?
A: These liners are manufactured from prime HDPE and are appropriate for general waste collection including light food waste in office and break room settings.

Why Buy

Prime HDPE construction provides reliable strength at lighter gauge for reduced per-unit cost. Star-seal bottom minimizes liner failures under load. Clear film supports visible-contents recycling compliance. Dispenser box simplifies deployment in multi-floor office and facility management operations.